Drilled Shafts...Oscillator/Rotator Shafts...Conventional Shoring...Pre-drilled/Vibrated Piles...Tieback & Tiedown Anchors...Soil Nailing/Vnail Systems...Temporary & Permanent Shotcrete...Sculptured Shotcrete...Secant Pile Walls...Cylinder Pile Walls...Access Shafts...Micropiles...Augercast Piles...Drilled Displacement Piles...Deep Soil Mixing...Cutter Soil Mixing...Jet Mixing...Jet Grouting...Compaction Grouting...Chemical Grouting...Vibro Compaction...Stone Columns...Aggregate Piers...Dynamic Deep Compaction...Dewatering
 
Malcolm Drilling has one of the largest and most up to date equipment inventories in the world. John Malcolm has moved to the forefront in buying the latest in equipment from Europe, using top drives rotary drilling rigs and the fully cased method using oscillators and rotators. In addition, a large inventory of customized drilling tools has also been developed. Some of these drilling rigs are featured here as well as some of our conventional and specialty rigs.

TOP DRIVE RIGS

BG-40

BG-28

BG-20

BG-15

CONVENTIONAL DRILL RIGS

Watson 3100

Watson 2500

LO-DRILL RIGS

Lodril DH 60-70

CRANES

Linkbelt LS 218

Liebherr 885

OSCILLATORS/ROTATORS

Leffer VRM 2500 Oscillator

Leffer RDM 3000 Rotator

TIEBACK RIGS

Klemm 807-4

Davey Kent DK 725

Davey Kent DK 920 Soil Nail Rig

PILE SETTING & SOIL MIX RIG

RG-23

SOIL CUTTER RIG

CSM unit on a RG-23

AUGERCAST PILE RIG

Continuous flight hollow stem auger on BG-25

OMEGA DISPLACEMENT PILE RIG

Hollow stem with displacement tool on BG-28

 
Terms of Use | Privacy Statement © 2010 Malcolm Drilling Co., Inc. All rights reserved