Drilled Shafts...Oscillator/Rotator Shafts...Conventional Shoring...Pre-drilled/Vibrated Piles...Tieback & Tiedown Anchors...Soil Nailing/Vnail Systems...Temporary & Permanent Shotcrete...Sculptured Shotcrete...Secant Pile Walls...Cylinder Pile Walls...Access Shafts...Micropiles...Augercast Piles...Drilled Displacement Piles...Deep Soil Mixing...Cutter Soil Mixing...Jet Mixing...Jet Grouting...Compaction Grouting...Chemical Grouting...Vibro Compaction...Stone Columns...Aggregate Piers...Dynamic Deep Compaction...Dewatering
 

SERVICES

Malcolm Drilling’s equipment fleet has grown from a single truck mounted drilling rig to an eighty million dollar equipment fleet that contains limited access rigs that can walk through a factory door or climb a slope, to large drill rigs capable of drilling holes up to 18 feet in diameter and up to 300 feet deep.

In addition to the more standard drill rigs, Malcolm Drilling has also expanded its fleet to include:

Pre-drilled/Vibrated Piles Drilled Shafts Jet Grouting
Tieback & Tiedown Anchors Oscillator/Rotator Shafts Compaction Grouting
Soil Nailing/Vnail Systems Micropiles Chemical Grouting
Temp. & Perm. Shotcrete Augercast Piles Vibro Compaction
Sculptured Shotcrete Drilled Displacement Piles Stone Columns
Secant Pile Walls Deep Soil Mixing Aggregate Piers
Cylinder Pile Walls Cutter Soil Mixing Dynamic Deep Compaction
Access Shafts Jet Mixing Dewatering
December 2009
Drilling For Growth
"...as a result, the company has been able to take on some of the industry's most difficult jobs."
October 2009
Oscillation-Drilled Shafts
UDOT Region 2 is having success with oscillation-drilled shafts the EXPRESSLink project that was conducted by Malcolm Drilling...
February 2009
S.F. based John Malcolm rises high by digging deep. The condo tower Malcolm Properties built with Lennar at 631 Folsom St. rises 22 stories in the air...
• TOP DRIVE RIGS
• CONVENTIONAL DRILL RIGS
• LO-DRIL RIGS
• CRANES
• OSCILLATORS/ROTATORS
• TIEBACK RIGS
• PILE SETTING & SOIL MIX RIG
635 Elliot Project Seattle
drilling tiebacks, and the finished wall for the 635 Elliott project in Seattle, WA
MDCI drilling micropiles from the roof of a parking garage
more than 40’ above grade.
Malcolm’s Ground Improvement Division offers innovative design-build solutions, seamlessly interfaced through our regional districts.
 
Terms of Use | Privacy Statement © 2010 Malcolm Drilling Co., Inc. All rights reserved